Glow-worm · Current Glow-worm F-code boilers
F.28Boiler failed to ignite
This code applies to Energy, Energy7, Ultimate3, Sustain, Betacom4. Fault codes narrow down the likely problem, but they do not replace a model-specific diagnosis.
What you can safely check
- Check whether another gas appliance works and whether a prepayment meter has credit.
- In freezing weather, visually check an accessible external condensate pipe for ice and follow the manufacturer's thawing guidance if applicable.
- Reset once only if the user manual permits it. If the code returns, arrange an engineer.
How an engineer may fix it
Test the gas supply and inlet pressure, ignition and ionisation components, condensate route, flue, gas valve and combustion settings; repair or replace the failed component.
Glow-worm presents these as a general current-code guide; verify applicability in the exact appliance manual.
Manufacturer source: Glow-worm UK — Boiler Fault Codes. Checked 15 August 2026. The appliance manual and an engineer’s on-site diagnosis take precedence. Never remove the boiler case yourself.